QLinq – The safety mobile

qlinq              £161.69 (plus VAT)

QLinQ is the first affordable fully functional mobile with integrated GPS technology. Through various service scenarios QLinQ can be used for a wide range of target groups. The QLinQ can be used with our Lone Worker Protection and Telecare services.

Technical Specifications

qlinq-specifications

General

Dimension (mm – H/W/D) 112 x 47 x 16.5 mm
Weight (g) 75 g

Hardware

GPS baseband SIRF GSC3F
GSM band Quad band GSM 850/900/1800/1900
Receiver 15 x 6 mm
Speaker 18 mm
Keyboard backlight Blue
Vibrate mode Yes
GSM Antenna Internal antenna
GPS Antenna Internal antenna
Memory 128M bits FLASH + 32M bits RAM
System interface Proprietary
Earphone interface 2.5 mm jack
RF Test Interface For use by mobile network operators for RF network testing.
Temperature Normal working conditions: -10 to 55 C
Limited working conditions: 55 to 65 C

Software

Ring tone 64 channel polyphonic MIDI for incoming calls
Voice codec FR, EFR, HR, AMR
Three path audio Earphone, Receiver and Speaker
GPS
  • SiRF Star III chipset
  • Receive 20 channels, L1 1575.42 MHz, C/A code 1.023 MHz chip rate
  • DGPS accuracy 1 to 5m, typical 0.05m/s
  • Acquisition rate (TTFF defined at 95% of first position local station)
    Standard GPS mode:

    • Hot start <1 second, average in open sky
    • Warm start <38 second, average in open sky
    • Cold start <42 second, average in open sky
OTA Over the air command settings from the SafeLinQ server using the SafeLinQ proprietary protocol.
Motion sensor Sends out alert information when activated and shock is detected.
Speed sensor Sends out alert information when activated ans speed threshold is met.