BloQ Professional – Specifications
The BloQ Professional can be used with our Vehicle Tracking and Asset Tracking services.
 |
General
| Dimension (mm – H/W/D) |
110 x 54 x 25 mm |
| Weight (g) |
120 g |
| Power Source |
DC 8-32V120 |
| Backup battery |
1400mA, 3.7V |
| Indicator LED (3x) |
GSM status indicator LED
GPS status indicator LED
Power status indicator LED |
| Motion sensor |
Sends out alert information when activated and shock is detected.12 |
| Speed sensor |
Sends out alert information when activated and speed threshold is met. |
| Temperature |
Normal working conditions: -30 to 80ºC (w/o battery equipped) |
|
GSM specifications
| Band |
Quad band GSM 850/900/1800/1900 |
| Compliancy |
GSM Phase 2/2+
- Class 4 (2W @ 850/900 MHz)
- Class 1 (1W @ 1800/1900 MHz) |
| GPRS |
GPRS multi-slot class 12
GPRS mobile station class B |
|
GPS specifications
| GPS Chipset |
MTK All-in-one GPS receiver |
| AGPS |
AGPS supported |
| Acquisition rate |
TTFF defined at 95% of first position local station:
- Hot start <1.2 seconds, average in open sky
- Warm start <35 seconds, average in open sky
- Cold start 35 seconds average |
| DGPS accuracy |
1-5m, typical 0.05m/s |
Interfaces
| Digital input |
5x digital input ports (3 positive/2 negative) |
| Analog input |
1x 10bits analog to digital converter |
| Digital input |
4x digital outputs Negative trigger, Max 300mA |
| Relay output |
1x relay output, max output 2A |
| Audio connector |
2.5 mm earphone jack for speaker and microphone |
| Power connector |
4 pin Molex type connector |
| GSM antenna |
SMA Type connector |
| GPS antenna |
SMA Type connector |
| Configuration serial port |
DB9 connector |
